Instead of calling your local plumber only to incur expensive repair costs, there are certain things you can do to unclog the toilet drain yourself. You might need a helping hand for the job. You can find the shutoff valve behind your toilet or on the wall. Use a small container to empty the toilet bowl and the toilet tank. Wear a pair and gloves and try to access the trap from within the bowl. If the object clogging the drain is lodged at the trap opening, then you might get lucky to remove it.
If not, then go on to the step below. Push it in firmly against the clog in the trap while rotating the auger handle clockwise. As the auger spins, its hooks will get hold of the clogged object. In case you find it difficult to rotate the auger handle, then try rotating it counterclockwise a little bit.
Once it turns, rotate it clockwise again. In case you feel that the auger has reached the clogged object, rotate it counterclockwise to remove the object. We base your location on your IP address. Some providers IP addresses may show your location outside of the state, even though you are physically within the state boundaries. But the district is also suspicious of the cause of the backup.
Load More Photos. Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Method 1. All rights reserved. This image may not be used by other entities without the express written consent of wikiHow, Inc. If you can still see the item after it was flushed, you may be able to retrieve the item by sticking your hand in the toilet, grabbing ahold to the item, and pulling it out.
If there is a lot of water in the toilet bowl, it may be easier to reach the item if you use a disposable cup or container to scoop out some of the water first. Try using a bent hanger to hook onto the item. First, take a metal hanger and untwist the end that is twisted around the neck of the hanger hook. Straighten the hanger out as much as possible before bending one end into a small hook shape. Then, carefully stick the hook end down the toilet drain and try to grab hold of the item with the hook.
Then, when the hook is down as far as it can go, push it down and gently trace the bottom of the drain pipe as you pull the hook back up. Hopefully, the hook will catch hold of the item on its way out. Depending on how your toilet drain is shaped, you may need to bend the hanger to allow it to bend into the drain pipe.
Use a drain snake if the item is far down the toilet drain. Then, try to feel around for the item as you slowly pull the drain snake back out. Drain snakes are available online and at most home improvement stores. When choosing a drain snake to use, choose an option that has a coiled or hooked end. This will make it easier for you to grab ahold of the item.
Method 2. Remove the dry dust bag and filter if your wet vacuum has a dry option. Then, following the instructions for your particular vacuum model, remove the dry dust bag and filter from the collection tank. This will keep both the dust bag and filter from getting wet and growing mildew over time. Direct the vacuum hose into the toilet.
Plug in the vacuum cord and turn on the vacuum. Then, hold onto the hose of the vacuum and direct the end of the hose into the toilet. Push the hose as far down the drain as possible. If so, direct the end of the hose so that the opening points at the item. Turn the vacuum on to start sucking up the water. Turn the vacuum on to start sucking up the toilet water. Keep sucking up the water until you hear the object pass through the hose, or until the collection tank is full.
If you see the item, you can retrieve it with your hands, a shovel, or any item with a scoop or hook on the end. The item may have gotten lodged in the hose. Empty the collection tank and vacuum again. To try again, first empty the water out of the collection tank. Then, put the hose back into the drain and turn the vacuum on again. Keep vacuuming until you hear or see the item get sucked into the hose, or until the collection tank gets full again. You may need to repeat this process a few times before the item gets sucked up into the vacuum.
Flush the toilet to refill the toilet bowl with water. The toilet bowl should refill with water and be ready to use. Method 3. First, locate the valve on the side, behind, or towards the bottom of the toilet. In most cases, you can do this by switching off the water supply from the control unit, which is usually located in the basement or an interior closet. Most toilets have a water tank in the back behind the bowl that has a removable lid.
Carefully lift the lid to remove it from the tank and set it aside. This will allow you to easily access the inside of the tank, and will help keep the lid from falling off or getting crack when you remove the toilet.
Remove all the remaining water from the tank and bowl. Using a wet vacuum or small container, vacuum or scoop out all the water from both the tank and the toilet bowl. This will keep any water from spilling or splashing onto you or the bathroom floor, and will make the toilet lighter and easier to lift. You can also use a baster to suction water out of the tank and bowl.
0コメント